The Zibro LC-132 laser paraffin heater is a stylish heater that can quickly heat the entire room with its maximum heating capacity of 3.2 kW and built-in fan. If the heater tips over, it switches off immediately for safe use. Pressing the Safety Stop button also immediately stops the Zibro LC-132 from heating. The child lock also contributes to safe use. Only a minimal amount of electricity is needed to operate the laser heater. Thanks to the electronic starter, the desired temperature can be set very precisely. With the timer function, you determine the temperature level at a specific time. This allows you to get the maximum efficiency from the heater and fuel.

The heater is very economical to use thanks to its built-in regulating thermostat. The thermostat automatically adjusts its combustion level, so the heater does not burn for longer than necessary. In addition, the economy mode calculates the most efficient combustion level to keep your room at the desired temperature. If the set temperature differs significantly from the ambient temperature, the booster start switches to a higher combustion level. This brings the room up to temperature quickly.

Recommended fuel: Firelux.

• Thermostat
• Timer
• Overheating protection
• Frost protection
• Child lock
• Tip-over protection
• Temperature sensor
• Safety stop

• Colour: Silver/black
• Dimensions: ‎34x43x49 cm
• Weight: 9 kg
• Portable: Yes
• Flue required: No
• Max. capacity m²: 48m²
• Min. capacity m²: 20m²
• Max. capacity m³: 120m³
• Min. capacity m³: 50m³
• Max. capacity in watts:: 3200
• Min. capacity in watts: 800
• Max. burning time per tank: 65 hours
• Tank capacity: 5.4 litres
• Max. fuel consumption: 0.333 l/h
• Min. fuel consumption: 0.083 l/h
• Anti-leak tank cap (cleangrip): No
• Power consumption (during start-up): 320 watts
• Power consumption (continuous): 13 watts
• Remote control: No
• CO² sensor: No
• Free transport cap: Yes
• Free fuel siphon pump: Yes
• Made in: Japan
• Warranty: 4 years