Zibro LC DX 32 Laser Heater 3.2 Kw

The  Zibro LC-DX 32 Laser heater contains an electronically controlled burner. A minimal amount of electricity is required for startup, the built-in fan, and several other functions. No flue or gas connection is required.

This Zibro LC-DX 32 heater burns odorlessly when the correct fuel is used and is therefore also ideal for use indoors.

A major advantage of this Laser heater is the electronically controlled computer it contains. This allows the heater to be set to the exact degree. This luxury paraffin heater is also equipped with a thermostat and a timer. Would you like the room to be heated to 20 degrees tomorrow morning at 8 o'clock? No problem!

The Zibro LC-DX 32 has a very fast electronic starter. This ensures that the heater reaches its full capacity within a few minutes and that the room quickly reaches the desired temperature. Once the heater has reached the set temperature, it will operate modulatingly and burn at a lower level. When the temperature drops below the set temperature, the heater will automatically burn at a higher level again. This way, you get the best efficiency from the heater and fuel.

• Thermostat
• Timer
• Economy mode
• Overheating protection
• Frost protection
• Child lock
• Tip-over protection
• Temperature sensor
• Safety shut-off
• Portable: Yes
• Flue required: No
• Min. capacity m²: 20 m²
• Max. capacity m²: 49 m²
• Min. capacity m³: 48 m³
• Max. capacity m³: 120 m³
• Max. capacity Watts: 3200 Watts
• Min. capacity Watts: 800 Watts
• Max. burning time per tank: 44 hours
• Tank capacity: 5.4 liters
• Min. temperature setting: 6°C
• Max. temperature setting: 28°C
• Max. fuel consumption: 0.323 l/h
• Min. fuel consumption: 0.083 l/h
• Anti-leak tank cap (cleangrip): Yes
• Power consumption (at startup): 320 Watts
• Power consumption (continuous): 13 Watts
• Remote control: No
• Free transport cap: Yes
• Free fuel siphon pump: Yes
• CO² sensor: No
• Weight: 8 kg
• Dimensions: WxDxH: 38x30x44 cm
• Warranty: 4 years